Audison Voice AV two

Audison Voce AV due - 2-channel AB amplifier with up to 900 W RMS, Hi-Res and intelligent control

The Audison Voce AV due is a 2-channel amplifier that provides clean power for front systems or subwoofers. With up to 900 W RMS in bridged mode, stable 2-ohm stereo operation, and tri-mode capability, it covers many installation scenarios. The integrated AMP (Amplifier Management Processor) monitors the operating status and displays it via four LEDs. ART (Automatic Remote Turn On/Off) ensures automatic power on and off – ideal for factory radios without a remote signal. Thanks to its 4–60 kHz frequency response, the AV due is Hi-Res capable.

You get flexible filters, high and low-level inputs, and a digital input. This makes the Audison Voce AV due a well-thought-out solution for OEM integration and classic aftermarket HiFi – at Carhifi.shop.

Technical Highlights

• 2-channel AB amplifier, stable at 2 Ω (stereo) and 4 Ω (bridged)
• Power up to 900 W RMS in mono mode
• AMP monitoring with 4 status LEDs
• ART: automatic on/off even without remote signal
• Hi-Res capable bandwidth from 4–60 kHz
• Flexible filter setup including 24 dB/Oct. Low-Pass (mono)

Technical Data

• Channels: 2
• Amplifier Class: AB
• Hi-Level Input: Yes
• Low-Level Input (Pre-In): Yes
• Digital Input: Yes
• Supply Voltage: 11–15 V DC
• Fuse on device/Recommendation: 60 A
• Idling current: 1.7 A
• Idling current in off state: 0.02 mA
• Current draw at 14.4 V DC, 2 Ω, maximum music power: 65 A
• Remote OUT: 12 V DC, 50 mA
• Remote IN: 7–15 V DC, 1 mA
• ART – automatic on/off with BTL speaker output: selectable

Amplifier Section

• THD @ 100 Hz, 4 Ω, 70% rated power: 0.04%
• Bandwidth A (-3 dB, 2 VRMS, 4 Ω): 4–60 kHz
• S/N Ratio A (A-weighted @ 1 V): 100 dBA
• Damping Factor A (1 kHz, 4 Ω): 120
• Input sensitivity Pre-In: 0.3–5 V RMS
• Input impedance Pre-In: 15 kΩ
• Input sensitivity Speaker-In: 1.4–24 V RMS
• Input impedance Speaker-In: 5 kΩ
• Total power RMS: 900 W
• Minimum Impedance: 2 Ω
• Output Power (RMS) @ 14.4 V DC, 1% THD:
  • 2 channels: 260 W x 2 (4 Ω)
  • 2 channels: 450 W x 2 (2 Ω)
  • 1 channel bridged: 900 W x 1 (4 Ω)
• Adjustable Crossover: Yes

CEA Specifications

• Output Power @ 4 Ω, 1% THD+N, 14.4 V: 260 W x 2
• S/N Ratio (referenced to 1 W output): 80 dBA

Inputs, Outputs & Filters

• Input Types: Pre-In / Speakers-In
• Pre-Out (Full Range): Yes
• Filter Section A (Full / High-Pass / Low-Pass): 50–5,000 Hz (2 ranges) @ 12 dB/Oct.
• Filter Section B (Low-Pass 24 dB mono): 50–500 Hz @ 24 dB/Oct.
• Remote controllable Sub volume: -50 to +6 dB

Dimensions & Weight

• Dimension A: 470 mm
• Dimension B: 399 mm
• Dimension C: 220 mm
• Dimension D: 198 mm
• Dimension E: 58 mm
• Weight: 7.2 kg

Special Features

• Hi-Res Audio certification thanks to 4–60 kHz bandwidth
• 2 x 450 W @ 2 Ω in audiophile AB class
• Built-in filters with up to 24 dB/Oct.

Installation & Compatibility

The AV due can be used classically as a 2-channel amplifier for front speakers or in bridged mode at 4 Ω as a subwoofer amplifier. Tri-mode operation is possible. Thanks to ART and high-level inputs, it is ideal for OEM radios without a separate remote signal. Plan the power supply to match the maximum current draw and the 60-A fuse. With its compact 58 mm height, the amplifier fits into many vehicle concepts.