Audison Voce II AVK 6 S II - 16.5 cm 2-way component system with Hi-Res Tweeter
The Audison Voce II AVK 6 S II is a 2-way speaker set for front installation, delivering clean mids, precise dynamics, and extended high frequencies up to 40 kHz. The 165 mm woofer with a pressed paper cone features a High Density Flux Ferrite magnet system, while the Teloton Fiber tweeter meets the Hi-Res Audio specification (JAS). Separate crossovers for woofer and tweeter, including level adjustment, assist you in fine-tuning in the vehicle.
Technical Highlights
- 2-way system with separate crossovers: 6 dB/Oct. (woofer) and 12 dB/Oct. (tweeter)
- 165 mm woofer, 4 Ohm, 125 W RMS / 250 W peak
- Pressed paper cone for natural sound characteristics and good transients
- Teloton Fiber tweeter with extended frequency response up to 40,000 Hz (Hi-Res Audio JAS)
- Level adjustment: Tweeter 0 / -1.5 dB; Woofer Mid-Contour On/Off
- High efficiency (91 dB) and wide usable operating range
Technical Data Woofer
- Woofer size: 165 mm
- Impedance: 4 Ohm
- Power handling - peak: 250 W
- Power handling - continuous: 125 W
- Frequency response: 50 - 5500 Hz (-6 dB)
- Voice coil diameter: 36 mm
- Magnet material: High Density Flux Ferrite
- Magnet size: 92 x 42 x 15 mm
- Cone material: Pressed paper
- Crossover type: Two-way, separate housing for Woofer (AVCX 2 W - Full/6 dB Oct.) & Tweeter (AVCX 2 T - 12 dB/Oct.)
- Crossover level adjustment: AVCX 2 T: Tweeter level: 0 / -1.5 dB; AVCX 2 W: Woofer Mid-Contour On / Off
Technical Data Tweeter
- Tweeter size: 1 mm
- Frequency response: 1200 - 40000 Hz
- Complies with HiRes Audio JAS, test conditions IEC 60268-5
- Power handling - peak: 150 W (Hi-Pass filtered @ 1.5 kHz - 12 dB Oct.)
- Voice coil diameter: 25 mm
- Diaphragm material: Teloton Fiber
Electro-acoustic specifications (TSP) Woofer
- Re: 2.9 Ohm
- Fs: 67 Hz
- Mms: 13.2 g
- Cms: 0.43
- BL: 4.9
- Qms: 6.76
- Qes: 0.67
- Qts: 0.61
- Vas: 10.28 l
- Le: 0.3 mH
- Spl: 91 dB
- Xmax: 4.2 mm
Weight
- Woofer weight: 1.3 kg
- Tweeter weight: 0.14 kg
- Crossover weight: 0.1 kg
Dimensions
- A: 165 mm
- B: 140.8 mm
- C: 65.6 mm
- D: 61 mm
- A1: 143.8 mm
- B1: 140.8 mm
- C1: 125.5 mm
- D1: 116.1 mm
Frequency Response
- Tweeter
- Woofer
Installation & Compatibility
With a nominal size of 165 mm and an installation depth of 65.6 mm, the set fits into many door and front systems. The separate crossovers simplify integration: you can lower the tweeter level by -1.5 dB and select the mid-contour for the woofer to adapt the setup to the vehicle interior and listening preferences. 4 Ohm impedance and 91 dB efficiency ensure good drivability â even with solid factory radios or compact amplifiers. For best possible performance, stable door damping and precise tweeter alignment are recommended.
Would you like to order the set or receive advice? At Carhifi.shop you will find suitable accessories and support for installation.
