Audison Prima APK 690 - 6x9 Inch 2-Way Component System for Door Installation
The Audison Prima APK 690 is a 6x9-inch component system for door installation, consisting of the AP 1 tweeter, the AP 690 woofer, and the matched APCX TW 690 crossover. Thanks to its shallow design and plug connectors, installation is quick and easy. You can operate the set directly with the factory radio or with an amplifier – the efficient tuning ensures clean and controlled reproduction in both cases. Available at Carhifi.shop.
Technical Highlights
- Oval 6x9-inch 2-way system (AP 1 + AP 690 + APCX TW 690)
- Power handling: 300 W peak, 100 W continuous
- Impedance: 4 Ohm
- Frequency response: 40 Hz – 20 kHz
- Crossover: High-pass 6 dB/Oct at 3.3 kHz
- Efficiency (Woofer): 95 dB
- Optimized for OEM positions; shallow mounting depth and quick plug connectors
Technical Data
- Woofer size 690 mm
- Tweeter size 26 mm
- Woofer voice coil diameter 25 mm
- Tweeter voice coil diameter 20 mm
- Crossover type HP 6 dB Oct - 3.3 kHz
- Magnet size woofer 90 x 32 x 15
- Power handling - Peak 300 W
- Power handling - Continuous 100 W
- Impedance 4 Ohm
- Frequency response 40 Hz - 20 kHz
- Woofer cone diameter 171 mm
- Xmax Woofer 4 mm
Electro-acoustic Properties
- Re Woofer 3.1 Ohm
- Fs Woofer 55 Hz
- Le Woofer mH @ 1 kHz 0.2
- Vas Woofer 37.1 l
- Mms Woofer 17 g
- Cms Woofer 0.5
- Bxl Woofer 5.3
- Qts Woofer 0.6
- Qms Woofer 7
- Qes Tweeter 2.78
- Spl Woofer 95 dB
Installation & Compatibility
The set is designed for installation in vehicle doors. The shallow mounting depth of the AP 690 facilitates use in OEM positions. The APCX TW 690 crossover offers an attenuation switch (0 dB, +3 dB) so you can adapt the high frequencies to the installation situation in the vehicle. Quick connectors simplify wiring and reduce potential sources of error. The water-repellent treated paper cone is suitable for use in the door area.
Features in Detail
- AP 1 Tweeter
- 26 mm membrane with wide roll surround for high efficiency and low resonance frequency
- Acoustic lens for correcting the vehicle interior frequency response in the 10-13 kHz range in critical OEM positions
- AP 690 Woofer
- 25 mm voice coil made of pure copper for high power handling and controlled deep bass reproduction
- Water-repellent treated paper cone, developed with FEM and optimized by Klippel R&D Scan Vibrometer
- Shallow mounting depth for easy integration into OEM mounting locations
- "Triple-Wave" surround profile for linear excursion
- Compact, resistant coated basket; motor fixed with damping epoxy adhesive
- High-current quick-connect terminals with double contact on plus/minus for flexible, quick installation
- APCX TW 690 Crossover
- Optimized for OEM integration; attenuation switch (0 dB, +3 dB) for vehicle-specific tuning
- With quick connectors to prevent connection errors
General
- Woofer weight 1.17 kg
- Tweeter weight 0.04 kg
