Audison bit One HD Virtuoso

Audison bit One HD Virtuoso - 13-Channel DSP with 24 Bit/96 kHz for High-Res Car Hi-Fi

The Audison bit One HD Virtuoso is a 13-channel DSP for demanding OEM integrations and fully active setups. It processes signals at 24 Bit/96 kHz with floating-point calculations and enables an Audison Full DA HD system: The audio signal remains digital up to compatible Audison amplifiers – ideal if you want to use Hi-Res sources without unnecessary conversions.

With up to 12 high- and 12 low-level inputs, two optical digital inputs, and flexible FIR/IIR filters, the Virtuoso adapts to complex vehicle installations. Audison power amplifiers and the DRC MP remote control can be seamlessly integrated via AD Link/AC Link.

Technical Highlights

• 13 DSP channels for complex OEM and aftermarket systems
• 24 Bit / 96 kHz signal processing (Floating Point)
• Audison Full DA HD: continuous digital signal routing to compatible Audison amplifiers
• FIR or IIR filters, slopes up to 48 dB
• Flexible integration: 12x High-Level, 12x Low-Level, 2x optical (S/PDIF up to 192 kHz/24 Bit)
• Precise time alignment with 0.04 ms steps and 0°/180° phase switching
• PC software connection via micro USB (Windows)

Power Supply & Control

• Nominal voltage: 11 – 15 V DC
• Quiescent current: 0.75 A
• Standby current draw: off without DRC MP 2 mA; off with DRC MP 5 mA
• Remote IN: 4 – 15 V DC (1 mA)
• Remote OUT: 4 – 15 V DC (130 mA)
• Fuse: 2 A

Signal Stage (Measurements)

• THD @ 1 kHz, 1 Vrms output: 0.004 %
• Frequency response (-3 dB): 10 Hz – 44 kHz
• S/N (A-weighted), 4 V Out, 2 V MASTER In: 105 dBA
• S/N (A-weighted), 4 V Out, 2 V AUX In: 110 dBA
• S/N (A-weighted), 4 V Out, OPTICAL IN1/IN2: 104 dBA
• Channel separation @ 1 kHz: 80 dBA
• Input sensitivity Pre In/Master: 1.3 – 9 Vrms
• Input sensitivity Speaker In/Master: 5 – 32 Vrms
• Input sensitivity AUX: 0.7 – 5 Vrms
• Input impedance Pre In: 15 kΩ
• Input impedance Speaker In/AUX: 5 kΩ
• Max. Output voltage @ 0.1 % THD: 4 V

Inputs

• Low-Level (Pre): Ch1 – Ch6; AUX L/R
• High-Level (Speaker In): Ch1 – Ch12
• Digital: 2x optical S/PDIF, max. 192 kHz/24 Bit

Outputs

• Analog Pre-Outs: Ch1 – Ch13 (IIR mode); Ch1 – Ch9 (FIR mode)
• Digital AD Link 1: Ch1 – Ch8 (IIR/FIR)
• Digital AD Link 2: Ch9 – Ch13 (IIR); Ch9 (FIR)

Connections & Control Bus

• PC connection: 1x micro USB
• To Audison amplifiers: 2x Control Bus (AC Link / AD Link)
• To Audison DRC MP: 1x AC Link

Crossovers

• Filter types: Full / Highpass / Lowpass / Bandpass
• Slopes:
  • Linkwitz: 12 / 24 / 36 / 48 dB
  • Butterworth: 6 / 12 / 18 / 24 / 30 / 36 / 42 / 48 dB
  • Bessel: 6 / 12 / 18 / 24 / 30 / 36 dB
  • FIR: 6 / 12 / 18 / 24 / 30 / 36 / 42 / 48 dB
• Crossover frequencies:
  • Low-Pass: 0 – 44,000 Hz (1 Hz steps)
  • High-Pass: 0 – 20,000 Hz (1 Hz steps)
• Phase switching: 0° / 180°

Time Alignment

• Distance range: 1.4 – 756 cm
• Delay: 0 – 22 ms
• Step size: 0.04 ms (corresponds to 1.4 cm or 0.6")

PC Software & Compatibility

• USB-compatible: 1.1 / 2.0 / 3.0
• Windows (32/64 Bit): XP, Vista, 7, 8, 10
• Minimum screen resolution: 800 x 600
• Operating ambient temperature: 0 °C – 55 °C

Installation & Application

Whether it's a factory radio with many speaker channels or a Hi-Res player via S/PDIF: The bit One HD Virtuoso accepts almost any signal and distributes it precisely to up to 13 outputs. This allows you to implement active multi-way systems, sub-front setups, or complex center/rear combinations – with precise crossover, time alignment, and phase. Integration into Audison amplifier systems is done via AD Link/AC Link, and operation optionally via the DRC MP.

Dimensions

If you're planning a clean OEM integration with Hi-Res capabilities, the bit One HD Virtuoso is a clear option. Get advice and configuration at Carhifi.shop.