{"title":"Enclosed Subwoofer","description":"","products":[{"product_id":"hertz-dieci-dba-201-f-8-zoll-aktiv-gehaeusesubwoofer","title":"Dieci DBA 201 F","description":"\u003ch2\u003eHertz Dieci DBA 201 F - Flat 8-inch Active Enclosed Subwoofer with 220 W RMS\u003c\/h2\u003e\n\u003cp\u003eThe Hertz Dieci DBA 201 F is an active 8-inch subwoofer in a particularly flat, sealed enclosure. It delivers controlled, powerful bass in tight spaces and can be easily integrated into factory and aftermarket systems thanks to variable filters and Auto-Turn-On. With 220 W RMS and 440 W Peak, you have enough reserves for everyday use and fun – without complicated installation.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8-inch active enclosed subwoofer (sealed, super-flat)\u003c\/li\u003e\n\u003cli\u003e220 W RMS output power (at 14.4 VDC, 1% THD), 440 W Peak\u003c\/li\u003e\n\u003cli\u003eFrequency response: 32 – 400 Hz\u003c\/li\u003e\n\u003cli\u003eLow-pass filter: 24 dB\/Oct., variable 50 – 150 Hz\u003c\/li\u003e\n\u003cli\u003eSubsonic filter: 24 dB\/Oct., fixed at 15 Hz\u003c\/li\u003e\n\u003cli\u003eBass boost: 0 – 6 dB @ 45 Hz\u003c\/li\u003e\n\u003cli\u003ePhase switch: 0 \/ 180°\u003c\/li\u003e\n\u003cli\u003eAuto On\/Off via Audio-Sense, optionally via remote\u003c\/li\u003e\n\u003cli\u003eHigh-impedance and RCA inputs for OEM and aftermarket radios\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eOperation \u0026amp; Sound Tuning\u003c\/h3\u003e\n\u003cp\u003eThe integrated electronics offer you precise adjustment to your system: variable low-pass (50–150 Hz), fixed subsonic filter at 15 Hz, bass boost up to 6 dB at 45 Hz, and a phase switch for correct alignment. With the included HRC 01 level remote control, you can comfortably adjust the sub level from the driver's seat (0–15 dB). The Audio-Sense circuit automatically switches the sub on and off after a pause; with an existing remote signal, you can also switch it conventionally.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: 8\" (200 mm) active subwoofer, sealed, flat enclosure\u003c\/li\u003e\n\u003cli\u003eOutput power (RMS): 220 W @ 14.4 VDC, 1% THD\u003c\/li\u003e\n\u003cli\u003ePeak power: 440 W\u003c\/li\u003e\n\u003cli\u003eSystem frequency response: 32 – 400 Hz\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: 100 dBA\u003c\/li\u003e\n\u003cli\u003eDistortion (THD) @ 100 Hz: 0.15 %\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 6.5 – 18 VDC\u003c\/li\u003e\n\u003cli\u003eStart-Stop operation up to: 6 VDC\u003c\/li\u003e\n\u003cli\u003eIdle current: approx. 260 mA\u003c\/li\u003e\n\u003cli\u003eCurrent consumption (max., music, 14.4 VDC): 8.5 A\u003c\/li\u003e\n\u003cli\u003eRemote turn-on pulse: 4 VDC\u003c\/li\u003e\n\u003cli\u003eAuto-Turn-On thresholds:\n\u003cul\u003e\n\u003cli\u003ePRE\/Line: from 10 mV VRMS\u003c\/li\u003e\n\u003cli\u003eSPK\/High (DC): from 2 VDC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput sensitivities:\n\u003cul\u003e\n\u003cli\u003ePRE\/Line: 0.2 – 5 VRMS\u003c\/li\u003e\n\u003cli\u003eSPK\/High: 1.2 – 30 VRMS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFilter \u0026amp; Control:\n\u003cul\u003e\n\u003cli\u003eLowpass: 24 dB\/Oct., 50 – 150 Hz (variable)\u003c\/li\u003e\n\u003cli\u003eSubsonic: 24 dB\/Oct., 15 Hz (fixed)\u003c\/li\u003e\n\u003cli\u003eBassboost: 0 – 6 dB @ 45 Hz\u003c\/li\u003e\n\u003cli\u003ePhase: 0 \/ 180°\u003c\/li\u003e\n\u003cli\u003eInternal bandwidth: 15 – 150 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDriver:\n\u003cul\u003e\n\u003cli\u003eNominal impedance (internal): 0.4 Ohm\u003c\/li\u003e\n\u003cli\u003eVoice coil: 38.6 mm Ø, copper\u003c\/li\u003e\n\u003cli\u003eMagnet: Ferrite, high flux density (110 x 45 x 17 mm)\u003c\/li\u003e\n\u003cli\u003eCone: pressed paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 4.3 kg\u003c\/li\u003e\n\u003cli\u003eAccessories: HRC 01 sub-level remote control (0 – 15 dB) included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA: 345 mm\u003c\/li\u003e\n\u003cli\u003eB: 245 mm\u003c\/li\u003e\n\u003cli\u003eC (Height): 79 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eWith a height of only 79 mm, the DBA 201 F fits under many front seats or in flat panel areas in the trunk. Thanks to high-level inputs and Auto-Turn-On, you can easily integrate it into OEM sound systems. The sealed design ensures precise, tight bass – ideal for music styles from rock to electronic. Available at Carhifi.shop.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":52841085501776,"sku":"DIECI-DBA-201-F","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/hertz-dieci-dba-201-f-8-20cm-aktiv-gehausesubwoofer-carhifi_shop-kaufen.jpg?v=1774448417"},{"product_id":"hertz-dieci-dbx-30-3-12-zoll-gehaeusesubwoofer","title":"Dieci DBX 30.3","description":"\u003ch2\u003eHertz Dieci DBX 30.3 - 12-inch Enclosed Subwoofer with 250 W RMS and 4 Ohm\u003c\/h2\u003e\n\u003cp\u003eThe Hertz Dieci DBX 30.3 is a 12-inch enclosed subwoofer that delivers powerful, controlled bass with minimal installation effort. The solid MDF enclosure and angled back wall reduce resonances and facilitate placement in the trunk. With 250 W RMS and up to 1000 W peak power, the box harmonizes perfectly with compact mono or 2-channel power amplifiers at 4 ohms. The widely usable frequency range of 28 to 300 Hz cleanly covers low frequencies.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesign: 12-inch (30 cm) enclosed subwoofer\u003c\/li\u003e\n\u003cli\u003ePower: 250 W RMS, 1000 W Peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 Ohm\u003c\/li\u003e\n\u003cli\u003eVoice Coil: 38 mm\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 28–300 Hz\u003c\/li\u003e\n\u003cli\u003eMechanical Excursion (Xmech): 9 mm\u003c\/li\u003e\n\u003cli\u003eEnclosure: Thick-walled MDF for high rigidity\u003c\/li\u003e\n\u003cli\u003eAngled back wall to reduce back wall reflections and for easier placement\u003c\/li\u003e\n\u003cli\u003eNo integrated filter component (sub-box without crossover)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe box is designed for quick installation and efficient use of space. Its shape fits neatly against the rear seat, saving storage space in everyday use. For operation, an amplifier with approximately 250–400 W RMS at 4 ohms is recommended. Start with a low-pass crossover at approx. 70–80 Hz, adjust phase and level to match your front system, and secure the box in the trunk to prevent slipping.\u003c\/p\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA: 484 mm\u003c\/li\u003e\n\u003cli\u003eB: 227 mm\u003c\/li\u003e\n\u003cli\u003eC: 343 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":52841085632848,"sku":"DIECI-DBX-30-3","price":169.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/hertz-dieci-dbx-30_3-12-30cm-gehausesubwoofer-carhifi_shop-kaufen.jpg?v=1774448435"},{"product_id":"hertz-cba-250-10-zoll-aktiv-gehaeusesubwoofer","title":"CBA 250","description":"\u003ch2\u003eHertz CBA 250 - 10-inch Active Enclosed Subwoofer with 250 W RMS\u003c\/h2\u003e\n\u003cp\u003eThe Hertz CBA 250 is a compact active subwoofer in a sealed enclosure, delivering targeted deep bass to your car with 250 Watts RMS and an efficient Class-D amplifier. The 2S² design (2 Sides \/ 2 Sounds), the SSP Sub Smart Plug, and the plug-and-play connection terminal make installation and handling easier. Thanks to high- and low-level inputs, you can integrate it into both OEM systems and aftermarket radios. Filters, bass boost, and phase can be precisely adjusted to your setup.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated high-performance amplifier module with 250 W RMS and 500 W Peak\u003c\/li\u003e\n\u003cli\u003eHe-Li technology (high efficiency\/low impedance) for approx. 90% efficiency – without a DC-DC converter\u003c\/li\u003e\n\u003cli\u003eButterworth low-pass 12 dB\/Oct., 50–200 Hz, fully bypassable if desired (e.g., when using an external DSP\/Pre-Out)\u003c\/li\u003e\n\u003cli\u003eBass Boost 0–6 dB at 45 Hz for targeted enhancement of the deep bass range\u003c\/li\u003e\n\u003cli\u003eStepless phase control 0–180° for clean integration with front systems\u003c\/li\u003e\n\u003cli\u003eHigh-level speaker input on the multi-pin connector for OEM radios\u003c\/li\u003e\n\u003cli\u003eLow-level RCA for aftermarket sources\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug): a single plug for quick, secure disconnection\u003c\/li\u003e\n\u003cli\u003e2S² enclosure concept and plug-and-play connection terminal for easy integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver size: 250 mm (10 inches)\u003c\/li\u003e\n\u003cli\u003ePower (RMS\/Peak): 250 W \/ 500 W\u003c\/li\u003e\n\u003cli\u003eImpedance: 0.4 Ohm\u003c\/li\u003e\n\u003cli\u003eType: Active, enclosed subwoofer box\u003c\/li\u003e\n\u003cli\u003eVoice coil: 60 mm (2.36 inches), copper\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20–200 Hz\u003c\/li\u003e\n\u003cli\u003eMagnet: High-flux density ferrite\u003c\/li\u003e\n\u003cli\u003eMagnet dimensions (D × d × h): 140 × 70 × 30 mm (5.51 × 2.76 × 1.81 inches)\u003c\/li\u003e\n\u003cli\u003eCone: pressed paper\u003c\/li\u003e\n\u003cli\u003eXmech (max. mechanical excursion): 14.75 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure dimensions: Length 440 mm, Width 334 mm, Height 135 mm (158 mm with stand)\u003c\/li\u003e\n\u003cli\u003eFlexible integration: High-level for factory radios, Low-level (RCA) for aftermarket head units\u003c\/li\u003e\n\u003cli\u003eCompact design: ideal for trunk, side panels, or double floor\u003c\/li\u003e\n\u003cli\u003eEasy handling with SSP plug-in\/unplug system and plug-and-play connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you're looking for an efficient, space-saving active subwoofer with practical features, the Hertz CBA 250 delivers controlled deep bass, easy connectivity, and clear adjustment options for your car hi-fi system.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":52841086157136,"sku":"CBA250","price":449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/hertz-cba-250-10-25cm-aktiv-gehausesubwoofer-carhifi_shop-kaufen.jpg?v=1774448492"},{"product_id":"hertz-dba-201f-8-zoll-aktiv-gehaeusesubwoofer","title":"DBA 201F","description":"\u003ch2\u003eHertz DBA 201F - Super Flat 8-inch Active Enclosed Subwoofer for Precise Bass\u003c\/h2\u003e\n\u003cp\u003eThe Hertz DBA 201F is an active, particularly flat 8-inch enclosed subwoofer that requires little space yet delivers commanding deep bass. Its sealed super-flat enclosure was optimized using FEM simulation. This keeps the diaphragm controlled even at high excursions, giving you clean, defined bass in your vehicle.\u003c\/p\u003e\n\u003cp\u003eSeveral options are available for integration into existing systems. The DBA 201F can be connected via low-level or high-level inputs and switches on automatically when needed – via remote, via the PRE signal (from 10 mV), or via DC detection at the speaker input. Thanks to its wide operating voltage and start-stop capability, it runs stably in everyday use.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 200 mm\u003c\/li\u003e\n\u003cli\u003ePower Handling (RMS): 220 W\u003c\/li\u003e\n\u003cli\u003ePower Handling (Peak): 440 W\u003c\/li\u003e\n\u003cli\u003eImpedance: 0.4 Ohm\u003c\/li\u003e\n\u003cli\u003eConstruction: Super Flat, Sealed\u003c\/li\u003e\n\u003cli\u003eVoice Coil: Ø 38.6 mm\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 32 - 400 Hz\u003c\/li\u003e\n\u003cli\u003eMagnet Size (W x D x H): 110 x 45 x 17 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.3 kg\u003c\/li\u003e\n\u003cli\u003eMagnet Material: High Density Flux Ferrite\u003c\/li\u003e\n\u003cli\u003eCone: Pressed Paper\u003c\/li\u003e\n\u003cli\u003eVoice Coil Type: Copper\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 6.5 - 18 V DC (Fuse 15 A)\u003c\/li\u003e\n\u003cli\u003eStart-Stop Voltage: 6 V DC\u003c\/li\u003e\n\u003cli\u003eConsumption at 14.4 V DC (max. music power): 8.5 A\u003c\/li\u003e\n\u003cli\u003eRemote IN Turn On: 4 V DC (1 mA)\u003c\/li\u003e\n\u003cli\u003ePRE Input Signal Turn ON: 10 mV RMS\u003c\/li\u003e\n\u003cli\u003eSPK Input DC Turn On: 2 V DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThanks to its flat, sealed enclosure, the Hertz DBA 201F is ideal for vehicles with limited space, for example, in the trunk or behind seats. The combination of high-level and low-level inputs makes it compatible with factory radios and aftermarket head units. Auto Turn-On simplifies retrofitting without a separate remote output. With its 15A fuse and wide voltage range, the subwoofer is suitable for everyday use – even in start-stop vehicles.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":52841086484816,"sku":"DBA-201F","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/hertz-dba-201f-8-20cm-aktiv-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774448520"},{"product_id":"hertz-dba-201-8-zoll-aktiv-gehaeusesubwoofer","title":"DBA 201","description":"\u003ch2\u003eHertz DBA 201 - 8-inch Active Enclosed Subwoofer with Dual Passive Radiators\u003c\/h2\u003e\n\u003cp\u003eThe Hertz DBA 201 is an active 8-inch enclosed subwoofer that combines compact installation with clean, powerful bass. The integrated amplifier, a low-pass filter, and auto-turn-on\/standby make connection to factory or aftermarket radios easy. You can connect the subwoofer via high-level or RCA and benefit from full bass extension even in small enclosures thanks to its dual passive radiators. 220 W RMS and 440 W peak power provide ample reserves – available at Carhifi.shop.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesign: Active 8-inch enclosed subwoofer with dual passive radiators\u003c\/li\u003e\n\u003cli\u003ePower: 220 W RMS \/ 440 W Peak\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 32 – 400 Hz\u003c\/li\u003e\n\u003cli\u003eDriver Size: 200 mm (8\")\u003c\/li\u003e\n\u003cli\u003eImpedance (internal): 0.4 Ohm\u003c\/li\u003e\n\u003cli\u003eVoice Coil: Ø 38.6 mm (1.52\"), Copper\u003c\/li\u003e\n\u003cli\u003eCone Material: Pressed Paper\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite, Size 115 x 47 x 25 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 6.7 kg\u003c\/li\u003e\n\u003cli\u003eFilter: Integrated Low-Pass Filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eConnections \u0026amp; Control\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: RCA (Pre) and High-Level (Speaker)\u003c\/li\u003e\n\u003cli\u003eAuto Turn-On via Pre-In: from 10 mVrms\u003c\/li\u003e\n\u003cli\u003eDC-Sense via High-Level: Turn-on from 2 V\u003c\/li\u003e\n\u003cli\u003eRemote-In: Turn-on at 4 V DC (approx. 1 mA)\u003c\/li\u003e\n\u003cli\u003eAutomatic Standby Mode\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePower Supply\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 6.5 – 18 V DC\u003c\/li\u003e\n\u003cli\u003eFuse: 15 A\u003c\/li\u003e\n\u003cli\u003eStart-Stop Compatible: Operation from 6 V\u003c\/li\u003e\n\u003cli\u003eMax. Current Consumption (Music, 14.4 V): 8.5 A\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe DBA 201 fits into many vehicles if you are looking for bass performance without requiring a lot of space. It works reliably with both factory radios and aftermarket head units. The passive radiators enable powerful deep bass without a bass reflex port – ideal for the trunk, false floor, or tight installation environments.\u003c\/p\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":52841087238480,"sku":"DBA-201","price":289.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/hertz-dba-201-8-20cm-aktiv-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774448549"},{"product_id":"hertz-mille-pro-mpbx-250-s2-10-zoll-gehaeusesubwoofer","title":"Mille Pro MPBX 250 S2","description":"\u003ch2\u003eHertz Mille Pro MPBX 250 S2 - Shallow 10-inch Enclosed Subwoofer with 500 W RMS and 2 Ohm\u003c\/h2\u003e\n\u003cp\u003eThe Hertz Mille Pro MPBX 250 S2 is a compact 10-inch enclosed subwoofer that delivers powerful and controlled bass despite its shallow design. The enclosure, made of 15 mm thick wood, is internally damped and braced to reduce resonances. Thanks to its 2S² design, you can choose between down-firing and up-firing orientation. The SSP (Sub Smart Plug) allows you to connect the subwoofer quickly and securely.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 250 mm (10 inches)\u003c\/li\u003e\n\u003cli\u003ePower Handling: 500 W RMS \/ 1000 W Peak\u003c\/li\u003e\n\u003cli\u003eImpedance: 2 Ohm\u003c\/li\u003e\n\u003cli\u003eVoice Coil: Ø 38 mm, Type: Single\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 25 – 400 Hz\u003c\/li\u003e\n\u003cli\u003eMagnet: High-density Ferrite, Size 134 x 55 x 36 mm\u003c\/li\u003e\n\u003cli\u003eCone: Polypropylene\u003c\/li\u003e\n\u003cli\u003eXmech (Mechanical Excursion): 20 mm\u003c\/li\u003e\n\u003cli\u003eEnclosure: 15 mm wood thickness, internal damping and bracing\u003c\/li\u003e\n\u003cli\u003eOrientation: 2S² design for up-firing or down-firing\u003c\/li\u003e\n\u003cli\u003eConnection: SSP (Sub Smart Plug) for quick, secure connection\u003c\/li\u003e\n\u003cli\u003eWeight: 10.8 kg\u003c\/li\u003e\n\u003cli\u003eDepth: 118 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEnclosure Dimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA (Width): 531 mm\u003c\/li\u003e\n\u003cli\u003eB (Height): 361 mm\u003c\/li\u003e\n\u003cli\u003eC (Bottom Depth): 160 mm\u003c\/li\u003e\n\u003cli\u003eC1 (Top Depth): 118 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe shallow enclosure fits well behind the rear seats or in narrow trunk sections. Choose the direction of radiation according to the installation situation: Down-firing protects the cone and uses the vehicle floor for even distribution, while up-firing is suitable for direct radiation into the cabin when placed freely.\u003c\/p\u003e\n\u003cp\u003eWith a 2 Ohm nominal impedance, the MPBX 250 S2 harmonizes ideally with 2-Ohm stable monoblocks. An amplifier with 400–600 W RMS at 2 Ohms is recommended for clean control and sufficient reserves.\u003c\/p\u003e\n\n\u003ch3\u003ePractical Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSpace-saving design with variable orientation thanks to 2S²\u003c\/li\u003e\n\u003cli\u003eQuick installation and removal via SSP plug system\u003c\/li\u003e\n\u003cli\u003ePrecise, deep bass down to 25 Hz, flexibly separable up to 400 Hz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hertz","offers":[{"title":"Default Title","offer_id":52841091334480,"sku":"MPBX-250-S2","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/hertz-mille-pro-mpbx-250-s2-10-25cm-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774448892"},{"product_id":"audison-voce-ii-avbx-12-d4-ii-subwoofer","title":"Voice Coil II AVBX 12 D4 II","description":"\u003ch2\u003eAudison Voce II AVBX 12 D4 II - 12-inch Enclosed Subwoofer with 4+4-Ohm Dual Voice Coil\u003c\/h2\u003e\n\u003cp\u003eThe Audison Voce II AVBX 12 D4 II is a 12-inch enclosed subwoofer that delivers powerful, deep bass in your vehicle. The 4+4 Ohm dual voice coil allows for flexible wiring, and its power handling of 550 W RMS (1100 W Peak) is suitable for powerful mono amplifiers. A 37 mm high CCAW voice coil on a fiberglass former, a high-density ferrite magnet, and a die-cast aluminum basket ensure stability and control. The polypropylene cone with mica injection and rubber surround operates across a wide frequency range from 25 to 400 Hz. Available at Carhifi.shop.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12 inch (300 mm) enclosed subwoofer\u003c\/li\u003e\n\u003cli\u003eDual voice coil: 4+4 Ohm for 2- or 8-Ohm wiring\u003c\/li\u003e\n\u003cli\u003ePower: 550 W Continuous, 1100 W Peak\u003c\/li\u003e\n\u003cli\u003eSensitivity: 84.5 dB\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25–400 Hz\u003c\/li\u003e\n\u003cli\u003eVoice coil: 37 mm winding height, CCAW on fiberglass former\u003c\/li\u003e\n\u003cli\u003eMagnet: high-density ferrite\u003c\/li\u003e\n\u003cli\u003eConstruction: Aluminum basket, polypropylene cone with mica injection, rubber surround\u003c\/li\u003e\n\u003cli\u003eDriver displacement: 0.9 l\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eElectroacoustic Parameters (TSP)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eResonance frequency (Fs): 23 Hz\u003c\/li\u003e\n\u003cli\u003eEquivalent volume (Vas): 63 l\u003c\/li\u003e\n\u003cli\u003eMaximum linear excursion (Xmax): 16.8 mm (Xmech: 20 mm)\u003c\/li\u003e\n\u003cli\u003eMoving mass (Mms): 298 g\u003c\/li\u003e\n\u003cli\u003eTotal Q (Qts): 0.5 (Qms: 6.2)\u003c\/li\u003e\n\u003cli\u003eDC resistance (Re): 1.8 Ohm\u003c\/li\u003e\n\u003cli\u003eForce factor (BL): 12.2 T·m\u003c\/li\u003e\n\u003cli\u003eEffective cone area (Sd): 539 cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions \u0026amp; Installation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOuter length (A): 607 mm\u003c\/li\u003e\n\u003cli\u003eOuter width (B): 401 mm\u003c\/li\u003e\n\u003cli\u003eEnclosure depth (C): 175 mm\u003c\/li\u003e\n\u003cli\u003eProtrusion (D): 35.2 mm\u003c\/li\u003e\n\u003cli\u003eInner depth (C1): 133 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 4+4 Ohm voice coils allow you to wire them in parallel for 2 Ohms (maximum power output of many monoblocks) or in series for 8 Ohms for controlled operation. Combine the subwoofer with a stable mono amplifier in the range of 500–600 W RMS at 2 Ohms to make good use of its reserves.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841092940112,"sku":"AVBX12D4II","price":699.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-voce-ii-avbx-12-d4-ii-12-30cm-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449037"},{"product_id":"audison-voce-ii-avbx-10-d4-ii-subwoofer","title":"Voice II AVBX 10 D4 II","description":"\u003ch2\u003eAudison Voce II AVBX 10 D4 II - 10-inch Enclosed Subwoofer with 4+4 Ohm Dual Voice Coil\u003c\/h2\u003e\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cp\u003eThe Audison Voce II AVBX 10 D4 II is a compact 10-inch enclosed subwoofer that offers flexible connection options thanks to its 4+4 Ohm dual voice coil. With 550 W continuous power and 1100 W peak, it delivers controlled, deep bass from 25 to 400 Hz. The aluminum basket, polypropylene cone with mica content, and robust rubber surround are designed for durability. A high-density ferrite magnet ensures efficient drive, while the low driver displacement of 0.6 liters reduces space requirements in the vehicle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNominal Diameter: 250 mm (10 inch) Subwoofer Driver\u003c\/li\u003e\n\u003cli\u003eImpedance: 4+4 Ohm Dual Voice Coil (flexible wiring)\u003c\/li\u003e\n\u003cli\u003ePower Handling: 550 W Continuous, 1100 W Peak\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 25 Hz to 400 Hz\u003c\/li\u003e\n\u003cli\u003eVoice Coil: 37 mm Winding Height, CCAW on Fiberglass Former\u003c\/li\u003e\n\u003cli\u003eMagnet Material: High-Density Ferrite\u003c\/li\u003e\n\u003cli\u003eMaterial Mix: Aluminum Basket, Polypropylene Cone with Mica Injection, Rubber Surround\u003c\/li\u003e\n\u003cli\u003eDisplacement Volume: 0.6 Liters Driver Displacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePerformance in Detail\u003c\/h3\u003e\n\u003cp\u003eThe AVBX 10 D4 II aims for precise bass in everyday setups. The dual voice coil simplifies adaptation to various amplifiers, while the linear excursion of 16.8 mm provides reserves for dynamic passages. This allows you to reliably integrate the subwoofer into systems ranging from compact trunk installations to discreet OEM additions.\u003c\/p\u003e\n\u003ch3\u003eElectro-acoustic Parameters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eResonance Frequency (Fs): 36 Hz\u003c\/li\u003e\n\u003cli\u003eEquivalent Volume (Vas): 14.8 Liters\u003c\/li\u003e\n\u003cli\u003eMaximum Excursion (Xmax): 16.8 mm (Xmech 20 mm)\u003c\/li\u003e\n\u003cli\u003eMoving Mass (Mms): 250 g\u003c\/li\u003e\n\u003cli\u003eTotal Q Factor (Qts): 0.7 (Qms 5.62)\u003c\/li\u003e\n\u003cli\u003eDC Resistance (Re): 1.82 Ohm\u003c\/li\u003e\n\u003cli\u003eForce Factor (BL): 11.2 T•m\u003c\/li\u003e\n\u003cli\u003eEffective Cone Area (D): 368 cm²\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDimensions \u0026amp; Installation\u003c\/h3\u003e\n\u003cp\u003eThe enclosure design is optimized for shallow mounting depth and easy integration. This means the subwoofer also fits into vehicles with limited space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOverall Length (A): 531 mm\u003c\/li\u003e\n\u003cli\u003eOverall Width (B): 361 mm\u003c\/li\u003e\n\u003cli\u003eEnclosure Depth (C): 160 mm\u003c\/li\u003e\n\u003cli\u003eProtrusion (D): 32.9 mm\u003c\/li\u003e\n\u003cli\u003eInternal Depth (C1): 118 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith its combined material selection and well-thought-out mechanics, you can get clean, powerful bass from compact setups – suitable for music styles from electronic to rock.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841093038416,"sku":"AVBX10D4II","price":629.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-voce-ii-avbx-10-d4-ii-10-25cm-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449055"},{"product_id":"audison-prima-apbx-10-as2-10-zoll-aktiv-gehaeusesubwoofer","title":"Prima APBX 10 AS2","description":"\u003ch2\u003eAudison Prima APBX 10 AS2 - 10-inch Active Enclosed Subwoofer with 400 W RMS for Precise Bass\u003c\/h2\u003e\n\u003cp\u003eThe Audison Prima APBX 10 AS2 is a 10-inch active enclosed subwoofer that delivers controlled, deep bass in a compact format. The integrated D-Class amplifier module (400 W RMS) is highly efficient and tuned to the installed 25 cm driver and the dense, sealed enclosure. With 2S² design (down- or up-firing), a plug-and-play terminal block, and variable filters, you can quickly integrate the subwoofer into OEM or aftermarket systems – without compromising sound quality.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated 400 Watt RMS 0.16 D-Class amplifier with he-li technology (high efficiency, low impedance) without switching power supply for almost ideal power output.\u003c\/li\u003e\n\u003cli\u003eDBT technology (Dynamic Bass Tracking) in the input stage utilizes the full power of the He-Li amplifier, keeping the bass tight and dynamic even at high levels.\u003c\/li\u003e\n\u003cli\u003eButterworth low-pass filter 12 dB\/Oct. with variable crossover frequency (50–300 Hz), phase control (0–180°), and adjustable bass boost 0–6 dB at 45 Hz.\u003c\/li\u003e\n\u003cli\u003eDeactivatable filters for using the sub output of a bit- or AP-bit processor.\u003c\/li\u003e\n\u003cli\u003eHigh-level input via multipole connector for maximum OEM integration as well as low-level (RCA) for aftermarket head units.\u003c\/li\u003e\n\u003cli\u003eART auto-on selectable: Remote-in, High-Level, or Audio Signal.\u003c\/li\u003e\n\u003cli\u003eUltra-flat enclosure profile (158 mm) in a sealed design, designed for the 10-inch APS 10 DL driver with high impedance.\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug) terminal block with plug-and-play connector for quick and secure disconnection of the box.\u003c\/li\u003e\n\u003cli\u003e2S² design (2 Sides \/ 2 Sounds): optional down-firing for more depth or up-firing for more punch and definition.\u003c\/li\u003e\n\u003cli\u003eDownward-facing leveling feet with Velcro inserts: non-slip on carpet and easily removable.\u003c\/li\u003e\n\u003cli\u003eRounded enclosure corners for easy placement and reduced resonances.\u003c\/li\u003e\n\u003cli\u003eOptimized cone, dustcap, and basket geometry for large linear excursion (9 mm one-way) with low mounting depth.\u003c\/li\u003e\n\u003cli\u003eIncludes HRC AP remote control for level adjustment from the driver's seat.\u003c\/li\u003e\n\u003cli\u003eRobust metal grille included for complete protection of the driver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver size: 250 mm (10 inches)\u003c\/li\u003e\n\u003cli\u003ePower handling (peak): 800 W\u003c\/li\u003e\n\u003cli\u003ePower handling (RMS): 400 W\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite\u003c\/li\u003e\n\u003cli\u003eCone: Water-repellent, pressed paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 440 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 334 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 135 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThanks to its flat design, the APBX 10 AS2 fits into many car trunks and can be positioned flexibly. You can connect it directly to factory radios via high-level inputs; with RCA, you can use aftermarket head units or processors. The automatic turn-on logic (ART) simplifies integration. Choose between down- and up-firing depending on the vehicle and desired bass behavior – this way, you get the maximum depth or punch out of the system.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841096315216,"sku":"APBX-10-AS2","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-prima-apbx-10-as2-10-25cm-aktiv-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449350"},{"product_id":"audison-prima-apbx-8-as2-8-zoll-aktiv-gehaeusesubwoofer","title":"Prima APBX 8 AS2","description":"\u003ch2\u003eAudison Prima APBX 8 AS2 - 8-inch Active Enclosed Subwoofer with 250 W RMS\u003c\/h2\u003e\n\u003cp\u003eThe Audison Prima APBX 8 AS2 is an active 8-inch enclosed subwoofer that delivers powerful deep bass in a compact size. Its integrated He-Li Class D amplifier operates with Dynamic Bass Tracking (DBT) for precise, dynamic bass reproduction – even at high volumes. Thanks to variable filters and well-designed connections, you can easily integrate it into factory and aftermarket systems. The flat, robust enclosure fits easily into the trunk and remains flexible in its orientation.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated Class D He-Li amplifier: 250 W RMS, high efficiency without switching power supply, optimized for very low impedances (down to 0.4 Ω)\u003c\/li\u003e\n\u003cli\u003eDBT technology (Dynamic Bass Tracking) for tight, dynamic bass at high volumes\u003c\/li\u003e\n\u003cli\u003e12 dB\/Oct. Butterworth low-pass with adjustable crossover frequency 50–300 Hz\u003c\/li\u003e\n\u003cli\u003ePhase control 0–180° and bass boost 0–6 dB at 45 Hz\u003c\/li\u003e\n\u003cli\u003eSwitchable filters for using a sub-dedicated output (Bit\/AP-Bit processor)\u003c\/li\u003e\n\u003cli\u003eOEM integration: High-level audio input via multi-pole connector; Aftermarket: Low-level via RCA\u003c\/li\u003e\n\u003cli\u003eART automatic (Automatic Remote Turn-On): switches via remote-in, high-level, or audio signal\u003c\/li\u003e\n\u003cli\u003eAir-cushioned, very flat enclosure construction, tuned to the 8-inch APS 8 DL driver\u003c\/li\u003e\n\u003cli\u003eSSP terminal block (Sub Smart Plug) with plug-\u0026amp;-play connector for quick, secure disconnection\u003c\/li\u003e\n\u003cli\u003e2S² design (2 Sides \/ 2 Sounds): Downfiring for more depth or Upfiring for more punch\u003c\/li\u003e\n\u003cli\u003eLeveling feet with Velcro inserts for secure hold and easy removal\u003c\/li\u003e\n\u003cli\u003eRounded corners for easy placement and to reduce enclosure resonances\u003c\/li\u003e\n\u003cli\u003eExclusive geometry of cone, dust cap, and basket for large linear excursion (9 mm, one-sided) with low mounting depth\u003c\/li\u003e\n\u003cli\u003eHRC AP remote control included\u003c\/li\u003e\n\u003cli\u003eMetal protective grille included for complete protection of the subwoofer driver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver size: 200 mm (8 inches)\u003c\/li\u003e\n\u003cli\u003ePower handling (continuous): 250 W RMS\u003c\/li\u003e\n\u003cli\u003ePower handling (peak): 500 W\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite\u003c\/li\u003e\n\u003cli\u003eCone: water-repellent, pressed paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 368 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 294 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 135 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eYou can connect the APBX 8 AS2 directly to your factory radio or via RCA to an aftermarket source. The selectable automatic turn-on simplifies integration into modern vehicles. Depending on the installation location, you can choose between downfire or upfire orientation to prioritize depth or punch. Thanks to the SSP plug-in terminal, the box can be quickly detached, for example, if you need the entire trunk space.\u003c\/p\u003e\n\n\u003ch3\u003eScope of Delivery\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudison Prima APBX 8 AS2 Active Enclosed Subwoofer\u003c\/li\u003e\n\u003cli\u003eHRC AP level remote control\u003c\/li\u003e\n\u003cli\u003eMetal protective grille\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841096380752,"sku":"APBX-8-AS2","price":449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-prima-apbx-8-as2-8-20cm-aktiv-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449359"},{"product_id":"audison-prima-apbx-8-r-8-zoll-gehaeusesubwoofer","title":"Prima APBX 8 R","description":"\u003ch2\u003eAudison Prima APBX 8 R - Slim 8-inch Ported Enclosure Subwoofer for Car\u003c\/h2\u003e\n\u003cp\u003eThe Audison Prima APBX 8 R is a compact 8-inch enclosed subwoofer that delivers powerful, controlled bass in a slim form factor. The ported enclosure is optimized for efficiency and deliberately utilizes the natural cabin gain below 60 Hz. With 500 W peak power, 250 W RMS, and a 4-ohm voice coil, the sub can be cleanly connected to common car hi-fi amplifiers. When combined with bridged channels of an AP4.9 bit or AP4 D, approximately 260 W RMS are available; the AP8.9 bit also fits perfectly. The slot-port, 2S² mounting option (down-\/up-firing) and the SSP terminal facilitate integration in the trunk and ensure practical installation.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8-inch (200 mm) ported enclosure subwoofer in an ultra-slim design\u003c\/li\u003e\n\u003cli\u003ePower: 500 W peak, 250 W RMS\u003c\/li\u003e\n\u003cli\u003e4-ohm voice coil for high compatibility\u003c\/li\u003e\n\u003cli\u003eSlot-port design for efficient low-frequency tuning\u003c\/li\u003e\n\u003cli\u003e2S² concept: Down-firing for more depth or up-firing for more punch\u003c\/li\u003e\n\u003cli\u003eLinear excursion: 9 mm (one-way)\u003c\/li\u003e\n\u003cli\u003eFEM-optimized motor for control at high excursion\u003c\/li\u003e\n\u003cli\u003eWater-repellent, pressed paper cone with cotton fiber reinforcement\u003c\/li\u003e\n\u003cli\u003eSSP terminal with push contacts and plug-and-play terminal block\u003c\/li\u003e\n\u003cli\u003eRobust metal grille to protect the driver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 200 mm\u003c\/li\u003e\n\u003cli\u003ePower Handling (Peak): 500 W\u003c\/li\u003e\n\u003cli\u003ePower Handling (Continuous): 250 W\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite\u003c\/li\u003e\n\u003cli\u003eCone: Cotton-Fibre Pressed Paper Cone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 470 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 334 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 109 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures \u0026amp; Construction\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-slim enclosure with precisely tuned slot-port for optimal utilization of the APS 8 R driver.\u003c\/li\u003e\n\u003cli\u003e2S² design (2 Sides\/2 Sounds): Down-firing for more deep bass through cabin gain, Up-firing for more punch and contour.\u003c\/li\u003e\n\u003cli\u003eLeveling feet with Velcro surfaces for secure grip on carpet and easy removal.\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug): classic push terminals plus plug-and-play terminal block for easy impedance configuration and quick disconnection.\u003c\/li\u003e\n\u003cli\u003eRounded enclosure corners facilitate placement in the trunk, stiffen the enclosure, and reduce resonances.\u003c\/li\u003e\n\u003cli\u003eSpecial cone\/dust cap\/basket geometry for long, linear excursion (9 mm, one-way).\u003c\/li\u003e\n\u003cli\u003eMassive, FEM-optimized magnetic system design for precise control even at high excursions.\u003c\/li\u003e\n\u003cli\u003eWater-repellent, pressed 8-inch paper cone with FEM-calculated profile, verified by Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eDesigned for combination with AP8.9 bit (2 channels bridged) or AP4.9 bit\/AP4 D (2 channels bridged) including the use of bass boost and parametric EQ of the integrated DSP.\u003c\/li\u003e\n\u003cli\u003eRobust metal grille for comprehensive driver protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSlim enclosure facilitates integration into many trunks without significant loss of space.\u003c\/li\u003e\n\u003cli\u003eDown- or Up-firing selectable depending on the vehicle and desired bass characteristics.\u003c\/li\u003e\n\u003cli\u003eRecommendation: Use on bridged channels of an Audison AP4.9 bit or AP4 D (approx. 260 W RMS) or on the AP8.9 bit bridged.\u003c\/li\u003e\n\u003cli\u003eSSP terminal enables clean, quick mounting and flexible wiring.\u003c\/li\u003e\n\u003cli\u003eVelcro leveling feet ensure a secure stand and quick removal.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841096511824,"sku":"APBX-8-R","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-prima-apbx-8-r-8-20cm-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449367"},{"product_id":"audison-prima-apbx-10-s4s-10-zoll-gehaeusesubwoofer","title":"Prima APBX 10 S4S","description":"\u003ch2\u003eAudison Prima APBX 10 S4S - 10-inch Enclosed Subwoofer with Precise Deep Bass\u003c\/h2\u003e\n\u003cp\u003eThe Audison Prima APBX 10 S4S is a shallow 10-inch enclosed subwoofer that delivers cleanly defined bass with compact installation dimensions. With 400 W continuous power and 800 W peak power, it plays controlled and dynamically. The single 4-ohm voice coil, a high-density flux ferrite magnet, and the pressed paper cone with cotton fibers ensure efficient drive and natural bass reproduction. The Sub Smart Plug (SSP) terminal strip allows you to connect the system securely and quickly. Depending on the installation situation, you can choose between down-firing for more depth or up-firing for noticeable punch. Available at Carhifi.shop.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-Side\/2-Sound Concept: Down-firing for powerful lows or up-firing for more attack.\u003c\/li\u003e\n\u003cli\u003eSSP terminal with pressure contacts and plug-and-play terminal strip for fast, error-free connection and flexible impedance configuration.\u003c\/li\u003e\n\u003cli\u003eUltra-flat, sealed enclosure (142 mm) – tuned for the APS 10 D driver.\u003c\/li\u003e\n\u003cli\u003eRounded enclosure edges for easy placement and reduced resonances.\u003c\/li\u003e\n\u003cli\u003eSpecial cone\/dust cap\/basket geometry for long linear excursion: 11 mm (one-way).\u003c\/li\u003e\n\u003cli\u003eMassive, FEM-optimized motor for precise control at high excursion.\u003c\/li\u003e\n\u003cli\u003eWater-repellent treated 10-inch paper cone with FEM and Klippel-optimized profile.\u003c\/li\u003e\n\u003cli\u003ePerfect complement to the AP F8.9 bit (2 channels bridged, 260 W RMS) including usable bass boost and parametric EQ function of the integrated DSP.\u003c\/li\u003e\n\u003cli\u003eRobust metal grille protects the subwoofer in everyday use.\u003c\/li\u003e\n\u003cli\u003eFeet with Velcro for secure hold on carpet and quick disassembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChassis Size: 250 mm (10 inches)\u003c\/li\u003e\n\u003cli\u003ePower Handling (Continuous): 400 W RMS\u003c\/li\u003e\n\u003cli\u003ePower Handling (Peak): 800 W\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 Ohm (Single Voice Coil)\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite\u003c\/li\u003e\n\u003cli\u003eCone: Cotton-Fibre Pressed Paper Cone\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 470 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 334 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 120 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe shallow, sealed enclosure is ideal for the trunk and can be oriented flexibly: Down-firing uses the vehicle floor to emphasize deep frequencies, while up-firing delivers more precision and kick. The SSP terminal strip simplifies connection to common amplifiers. In combination with the Audison AP F8.9 bit, you can use the integrated DSP functions for precise bass tuning. At Carhifi.shop, you get the APBX 10 S4S as a practical solution for powerful, controlled bass with minimal space requirements.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841096610128,"sku":"APBX-10-S4S","price":319.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-prima-apbx-10-s4s-10-25cm-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449373"},{"product_id":"audison-prima-apbx-10-ds-10-zoll-gehaeusesubwoofer","title":"Prima APBX 10 DS","description":"\u003ch2\u003eAudison Prima APBX 10 DS - Flat 25 cm Enclosed Subwoofer with 800 W Peak\u003c\/h2\u003e\n\u003cp\u003eThe Audison Prima APBX 10 DS is a compact enclosed subwoofer that reliably delivers deep, controlled bass in shallow trunks. With 800 W peak power, 400 W RMS, and a mechanical excursion of over 18 mm, it combines punch and precision. Depending on your vehicle and preference, you can orient it either down-firing for more depth or up-firing for more punch. In conjunction with the AP1 D amplifier, the APBX 10 DS plays powerfully and cleanly – regardless of music style.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e25 cm\/10-inch driver in a sealed, ultra-flat enclosure\u003c\/li\u003e\n\u003cli\u003ePeak power 800 W, continuous power 400 W\u003c\/li\u003e\n\u003cli\u003eMechanical excursion \u0026gt;18 mm; linear excursion 11 mm (one-way)\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite for high field stability\u003c\/li\u003e\n\u003cli\u003eCone: water-repellent, pressed paper – developed with FEM simulation and optimized with Klippel scan\u003c\/li\u003e\n\u003cli\u003eTwo mounting options: down-firing for more deep bass or up-firing for tighter kick\u003c\/li\u003e\n\u003cli\u003eSturdy metal grille protects the driver in everyday use\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug) with pressure contacts and plug-and-play terminal block – quick impedance configuration and unlocking\u003c\/li\u003e\n\u003cli\u003eRounded enclosure corners for easy positioning and reduced resonances\u003c\/li\u003e\n\u003cli\u003eFEM-optimized motor structure for controlled excursion at high levels\u003c\/li\u003e\n\u003cli\u003eIncludes AP1 D amplifier for powerful control\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 250 mm (10 inches)\u003c\/li\u003e\n\u003cli\u003ePeak power handling: 800 W\u003c\/li\u003e\n\u003cli\u003eContinuous power handling: 400 W RMS\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite\u003c\/li\u003e\n\u003cli\u003eCone: Water Repellent Pressed Paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 470 mm\u003c\/li\u003e\n\u003cli\u003eWidth: 334 mm\u003c\/li\u003e\n\u003cli\u003eHeight: 120 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe flat design allows for discreet placement in the trunk. Leveling feet with Velcro ensure a secure hold on carpet and can be quickly removed if necessary. The dual-orientation design (down-\/up-firing) makes tuning to your vehicle straightforward.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-flat enclosure (142 mm) with a sealed design, tuned to the APS 10 D driver\u003c\/li\u003e\n\u003cli\u003eCompatible with Audison power amplifiers: ideal with AP8.9 bit (2 CH + 2 CH bridged), AP5.9 bit (Sub-CH) or AP4.9 bit\/AP4 D (2 CH bridged)\u003c\/li\u003e\n\u003cli\u003eUtilizes the DSP functions (bass boost, parametric EQ) of the mentioned amplifiers for precise bass adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eIf you're looking for a space-saving 10-inch subwoofer with real depth and flexible orientation, the Audison Prima APBX 10 DS is a safe choice – available at Carhifi.shop.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841096773968,"sku":"APBX-10-DS","price":319.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-prima-apbx-10-ds-10-25cm-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449381"},{"product_id":"audison-prima-apbx-8-ds-8-zoll-gehaeusesubwoofer","title":"Prima APBX 8 DS","description":"\u003ch2\u003eAudison Prima APBX 8 DS - Flat 8-inch Enclosed Subwoofer with 500W Peak\u003c\/h2\u003e\n\u003cp\u003eThe Audison Prima APBX 8 DS is a compact 8-inch enclosed subwoofer that provides powerful bass in small trunks. With a 4+4 ohm dual voice coil, 8.5 liters enclosure volume, and a sophisticated 2S² design, you can use it flexibly as a down-firing or up-firing solution. In combination with Audison AP amplifiers, you benefit from the integrated bass boost and DSP features for precise tuning. At Carhifi.shop, you get the sub including suitable accessories for a clean integration.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 8 inches \/ 200 mm\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 + 4 Ohm (Dual Voice Coil)\u003c\/li\u003e\n\u003cli\u003ePower: 250 W RMS (Continuous), 500 W Peak\u003c\/li\u003e\n\u003cli\u003eEnclosure Volume: 8.5 Liters\u003c\/li\u003e\n\u003cli\u003eMagnet: High Density Flux Ferrite\u003c\/li\u003e\n\u003cli\u003eCone: Water-repellent, pressed paper\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 374 x 334 x 109 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFeatures \u0026amp; Details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-flat enclosure with only 131 mm mounting height, tightly constructed and optimally matched to the APS 8 D driver.\u003c\/li\u003e\n\u003cli\u003e2S² Design (2 Sides\/2 Sounds): choose down-firing for more low-end or up-firing for more punch and definition.\u003c\/li\u003e\n\u003cli\u003eAdjustable leveling feet with Velcro inserts for a firm grip on carpet and easy removal.\u003c\/li\u003e\n\u003cli\u003eSSP (Sub Smart Plug): classic push terminals plus plug-and-play terminal block for quick impedance configuration and rapid disconnection.\u003c\/li\u003e\n\u003cli\u003eRounded corners for easy positioning in the trunk, additional enclosure reinforcement, and reduced resonances.\u003c\/li\u003e\n\u003cli\u003eSpecial geometry of cone, dust cap, and basket for long-excursion, linear movement.\u003c\/li\u003e\n\u003cli\u003ePowerful motor assembly, FEM-optimized for control at high excursion.\u003c\/li\u003e\n\u003cli\u003e8-inch cone made of water-repellent, pressed paper, developed with FEM and Klippel Scan Vibrometer.\u003c\/li\u003e\n\u003cli\u003eIdeal with Audison AP1 D Mono or AP4.9 bit\/AP4 D (bridged) – use the DSP's bass boost and parametric EQ for fine-tuning.\u003c\/li\u003e\n\u003cli\u003eRobust metal grille protects the driver in everyday use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe flat design facilitates installation in many vehicles without sacrificing pressure and precision. The 4+4 ohm dual voice coil allows for various wiring configurations for the appropriate amplifier load. Depending on space and sound preference, you can mount the subwoofer as down-firing or up-firing. With the leveling feet, you can quickly align it, and the SSP connection speeds up installation. In combination with Audison AP amplifiers, you can get the maximum out of the APBX 8 DS using DSP, bass boost, and EQ.\u003c\/p\u003e","brand":"Audison","offers":[{"title":"Default Title","offer_id":52841096839504,"sku":"APBX-8-DS","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/audison-prima-apbx-8-ds-8-20cm-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449393"},{"product_id":"hifonics-maxximus-mxz12dual-12-zoll-gehaeusesubwoofer","title":"Maxximus MXZ12DUAL","description":"\u003ch2\u003eHifonics Maxximus MXZ12DUAL - 12 Inch Dual-Bandpass Enclosed Subwoofer with LED\u003c\/h2\u003e\n\u003cp\u003eThe Hifonics Maxximus MXZ12DUAL is a 12-inch enclosed subwoofer with a dual-bandpass design for powerful bass in your trunk. It delivers 2000 W RMS and 4000 W Max at 4+4 Ω and combines a mirrored inner chamber with switchable LED lighting in blue or white. The robust MDF enclosure minimizes resonances and ensures precise, powerful output.\u003c\/p\u003e\n\u003cp\u003eIf you're looking for a ready-to-play bandpass with high output, this system is a direct solution – visually and technically impressive, available at Carhifi.shop.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesign: 2 x 30 cm (12 inch) dual-bandpass system\u003c\/li\u003e\n\u003cli\u003ePower: 2000 W RMS, 4000 W Max\u003c\/li\u003e\n\u003cli\u003eImpedance\/Voice Coils: 4+4 Ω\u003c\/li\u003e\n\u003cli\u003eEnclosure: sturdy MDF walls with mirrored inner chamber\u003c\/li\u003e\n\u003cli\u003eLighting: switchable LED in blue or white\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D bottom\/top): 88 x 39 x 55\/39 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe dual-bandpass enclosure is designed for trunk use. With a width of 88 cm and a height of 39 cm, it fits into many vehicles; the depth is 55 cm at the bottom and 39 cm at the top. In practice, aiming the ports towards the rear often provides the highest efficiency. The 4+4 Ω configuration allows for flexible wiring with the amplifier (series or parallel) to achieve the desired load impedance. A powerful, stable amplifier and clean power supply are recommended for its full potential.\u003c\/p\u003e","brand":"Hifonics","offers":[{"title":"Default Title","offer_id":52841103786320,"sku":"MXZ12DUAL","price":799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/hifonics-maxximus-mxz12dual-12-30cm-gehausesubwoofer-carhifi_shop-kaufen.jpg?v=1774449719"},{"product_id":"esx-dbx800a-8-zoll-aktiv-gehaeusesubwoofer","title":"DBX800A","description":"\u003ch2\u003eESX DBX800A - 8-inch Active Subwoofer for Spare Wheel Well\u003c\/h2\u003e\n\u003cp\u003eThe ESX DBX800A is an active 8-inch enclosure subwoofer for vehicles with a spare wheel well. Two 20-cm drivers in a bass reflex enclosure and the integrated Power4 active module deliver deep, controlled bass – without losing trunk space.\u003c\/p\u003e\n\u003cp\u003eDo you want powerful deep bass and still have everyday usable storage space? The DBX800A efficiently utilizes the well, powers both drivers with a Class D mono amplifier, and offers useful adjustment options such as low-pass, phase, and bass boost. Thanks to high-level or RCA input, it can be neatly connected to both factory and aftermarket radios. Auto-turn-on, start-stop compatibility, and protection functions ensure stable operation in the vehicle.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 20 cm (8\") Dual Active Bass Reflex System\u003c\/li\u003e\n\u003cli\u003eSuitable for the spare wheel well\u003c\/li\u003e\n\u003cli\u003eEfficient Class D Mono Amplifier\u003c\/li\u003e\n\u003cli\u003ePower: 1 x 400\/800 Watts RMS\/Max.\u003c\/li\u003e\n\u003cli\u003eEfficiency up to 84%\u003c\/li\u003e\n\u003cli\u003eLow-pass filter 40–120 Hz with 12 dB\/Oct.\u003c\/li\u003e\n\u003cli\u003ePhase switch 0°\/180°\u003c\/li\u003e\n\u003cli\u003eBass Boost 0–6 dB @ 45 Hz\u003c\/li\u003e\n\u003cli\u003eRCA low-level input\u003c\/li\u003e\n\u003cli\u003eHigh-level input (for OEM radios)\u003c\/li\u003e\n\u003cli\u003eAutomatic turn-on function (DC or signal)\u003c\/li\u003e\n\u003cli\u003eStart-stop capable: bridges up to 5 s \/ up to 7 V\u003c\/li\u003e\n\u003cli\u003eEPS PRO with 10R \/ 150R \/ 600R (switchable)\u003c\/li\u003e\n\u003cli\u003eInput sensitivity 15 or 40 Volts (switchable)\u003c\/li\u003e\n\u003cli\u003e3-level limiter function, clipping LED\u003c\/li\u003e\n\u003cli\u003eBass level cable remote control\u003c\/li\u003e\n\u003cli\u003e50 mm (1\") voice coils\u003c\/li\u003e\n\u003cli\u003ePulp paper cones of the subwoofers\u003c\/li\u003e\n\u003cli\u003eSturdy perforated grilles for driver protection\u003c\/li\u003e\n\u003cli\u003eHigh-quality logo embroidery\u003c\/li\u003e\n\u003cli\u003eRobust carpet covering\u003c\/li\u003e\n\u003cli\u003eDimensions: Ø 58.5 x 18 cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eInstallation \u0026amp; Compatibility\u003c\/h3\u003e\n\u003cp\u003eRound design for the spare wheel well (diameter 58.5 cm, height 18 cm). The DBX800A can be flexibly integrated via RCA or high-level. The automatic turn-on function (DC\/signal) simplifies connection to OEM systems; start-stop compatibility supports on-board electrical systems with short-term voltage drops.\u003c\/p\u003e\n\u003cp\u003eYou can get the ESX DBX800A at Carhifi.shop.\u003c\/p\u003e","brand":"ESX","offers":[{"title":"Default Title","offer_id":52841104933200,"sku":"DBX800A","price":449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0933\/3004\/7312\/files\/esx-dbx800a-8-20cm-aktiv-gehausesubwoofer-carhifi_shop-kaufen.webp?v=1774449791"}],"url":"https:\/\/carhifi.shop\/en\/collections\/gehaeusesubwoofer.oembed","provider":"Carhifi Shop","version":"1.0","type":"link"}